TP-LINK TL-SC2020N Manuale Utente

TL-SC2020N Wireless N Network Camera Rev: 1.0.0 1910010671

2Chapter 1 Safety Instructions  Before you use this product This product has been designed with safety in mind. However, the electrical products

3Chapter 2 Minimum System Requirement & Product Feature 2.1 System Requirement For normal operation and viewing of the network camera, it’s

4Supported protocols TCP/IP, DHCP, PPPoE, ARP, ICMP, FTP, SMTP, DNS, NTP, UPnP, RTSP, RTP, RTCP, HTTP, TCP, UDP Simultaneous Connection Up to 3 user

5 Solid Blue: The Camera has been connected to a network. Built-in Microphone: The location where the voice from your partner comes out. 2.3.2

62.4 Mount the Camera 2.4.1 The Screw Size There are three supplied screws for mounting the Camera. The length of the screws is 25±1 mm and the

7Wireless section of 5.3.2 Network. Please connect the Camera according to the following steps. 2.5.1 Wired Connection 1. Connect the Camera t

8Chapter 3 Using Camera via Web Browser 3.1 Obtain the IP Address 1. Insert the provided CD into your CD-ROM driver. The Setup Wizard will automa

93. After the installation is finished, click Start > All Programs > TP-LINK >Intelligent IP Installer to start using the program. Figure

103.2 Windows Web Browser .2 Windows Web Browser The configuration of browser is similar in Windows XP/Vista/7. Here we take IE browser in Windows

113 The monitor image will be displayed in your browser. In the far left side of main configuration are Home, Information, Basic setup, System and

COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other

12Chapter 4 Operating Camera via Mobile Phone 4.1 Mobile Phone Viewing 4.1.1 3G Mobile Phone Streaming Viewing For 3G mobile phone viewing, typ

133. Enter name and password. Default values are both admin.Then click Log in 4. The TP-LINK User Interface and live image will show up in the m

14Chapter 5 Configuration of Main Menu In the left side of main configuration are Home, Information, Basic setup, System and Language. 5.1 Home In

155.1.2 Snapshot You can capture a still image shot by clicking the Camera icon and save it in the operating computer. Symbols Meaning A snap

165.2 Information The Information screen provides the product factory information which includes Product Name, Current Version, Firmware current Da

17  Add: Click this button to add a new account.  Modify: Click this button to edit the selected account.  Remove: Click this button to delete

18 Password: Set a password for the account.  Re-type Password: Re-type the password to confirm.  Viewer Mode: Set the user mode among Viewer,

19 Obtain DNS server address automatically: Select this option to obtain the address of DNS server automatically.  Use the following IP address

20  IP Address: The IP address obtained at the PPPoE connecting with network.  User ID: Enter the user ID for authentication necessary for PPPoE

21work. It also widely used in XDSL (digital affiliate line such as ADSL, VDSL or SDSL) 2) The Camera needs to be rebooted after it finishes changi

FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules

22 2. Input all information and follow step by step with DynDNS. 3. Login with new account and click Account → My Hosts → Add Host Services.

23 4. Type domain in the Hostname field and select sub-domain. 5. After typing information, check your DDNS service

24 6. Type your DDNS User ID, Password and Host name in Setting → Network → DDNS. After completing setting, reboot the Camera. 5.3.2.4 UPnP (Uni

25  HTTP Port: Enter the HTTP port number and default HTTP port is 80.  SSL Port: Enter the SSL port number and default SSL port is 443.  RTSP

26 WLAN: Select Enable to enable the wireless function; select Disable to disable the function.  Device Mac address: This displays the MAC addre

27If you want manually fill in the ESSID of the wireless network, you can click Manual button. The network wireless setting page will display. Then

28  Encryption – You can select TKIP or AES. Keep this option the same with that of the wireless network.  Passphrase - Enter the desired AP/ R

29 Secondary DNS server: Enter the IP address of the secondary DNS server, if necessary. 5.3.2.6 WPS WPS (Wi-Fi Protected Setup) function allows y

302. Secondly, open the router’s Web-based Utility and click WPS/QSS link on the left of the main menu. Then the following screen will appear. Clic

31 Default: After the adjustment of all setting, you can still click Default to make the setting back to the original setting.  Backlight Compen

CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be requi

325.3.6 Camera setting On this page, you can set the Camera Name and whether the LED is on or off.  Camera Name: You can enter a new name for th

33  Motion Detection: Click to select motion detection.  Motion Detection 1: Click it on for using Motion Detection 1 function as a sensor. You

34 Select On when you use the e-Mail (SMTP) function. The common setting options are displayed below. Select Off, if you do not wish to use the e-Ma

35up to three recipient E-mail addresses.  Administrator E-mail Address: Type the Administrator e-Mail address up to 64 characters. This address i

36 Select On when you use FTP function. The FTP client Setting screen appears. Select Off, when you do not wish to use the FTP client function. 

37 Schedule Selection: Select the list box to specify the schedule you want to set.  FTP -Alarm / E-mail (SMTP) -Alarm  Start Time, End Ti

38saved file. Click “OK” and this Camera is adjusted according to the loaded data and then restarted.  Firmware Update: Update the device softwa

39 Time Zone: Select the Time Zone format of Greenwich Mean Time among different cities. The time display will be the same as the current date / t

40Appendix A. Frame-rate and Bitrate Table – Help to set Camera with your network environment to access Internet. Base on your network upload enviro

41640*480 15 4970 51.2 640*480 10 3162 32.6 640*480 7 2427 25.0 640*480 5 1961 20.2 640*480 1 392 4.0 320*240 30 3416 35.2 320*240 20 2

Industry Canada Statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: 1)

42Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following tes

43Español [Spanish] Por medio de la presente [nombre del fabricante] declara que el [clase de equipo] cumple con los requisitos esenciales y cualesq

44Svenska [Swedish] Härmed intygar [företag] att denna [utrustningstyp] står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta

45Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital d

TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: Wireless N Network Camera Model No.: TL-SC

iCONTENTS Package Contents...1 Chapter 1

iiAppendix .........40 A. Frame-rate

1Package Contents The following items should be found in your package:  TL-SC2020N Wireless N Network Camera  Power Adapter  Mounting Bracke