TP-LINK TL-WR702N Specifiche Pagina 10

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 175
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 9
TL-WR702N 150Mbps Wireless N Nano Router
- 4 -
1.4 Panel Layout
Figure 1-1 TL-WR702N sketch
¾
LED
Status Indication
Solid It’s powered on but the LAN/WAN port is not connected.
Flashing
Slowly
The LAN/WAN cable is connected but there is no data
being transmitted or received.
Flashing
Quickly
The LAN/WAN cable is connected and there is data being
transmitted or received.
Table 1-1 The LED Description
¾ LAN/WAN: This LAN/WAN port works as LAN in AP/Repeater/ Bridge/Client mode and as
WAN in Router mode. As LAN, it connects the Router to the local PC; as WAN, it enables
you connect the DSL/cable Modem, or Ethernet.
¾ Power: This port is used to connect the provided power adapter.
¾ ResetIt is used to reset the Router to its factory defaults. With the Router powered on, use
a pin to press and hold the Reset button (about 5 seconds) until the SYS LED becomes
quick-flash from slow-flash. And then release the button and wait the Router to reboot to its
factory default settings.
Vedere la pagina 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 174 175

Commenti su questo manuale

Nessun commento